|
|
By erich, on June 2nd, 2006% Thanks Samir!
So… for a while now… MythTV hasn’t been commercial flagging any shows nor has it been compressing shows.
The log displays “NVR::doAudioThread() This Unix doesn’t support device files for audio access. Skipping???
Other times, when I bother to look, the log displays some hex number when trying to find a codec.
For months I’ve been searching why these error messages are being produced… Finally, I saw a thread on the MythTV forum.
Apparently, disabling oss during compilation (–disable-oss) breaks the Nuppel Video Recorder sound options. So, even if the ‘backend’ doesn’t have sound hardware you still need to compile the source with it.
DUMB!!!!!
I use a dedicated …
[Continue reading]
By brian, on April 10th, 2006% Like we need another MythTV-Related post. I guess its now so important to Eric & I we have to blog on it though!
Anyway, I’ve had my MythTV system up and running pretty nearly flawlessly for almost 2 months (which works out to 288 recordings in 259 hours and 14 minutes taking up 263 GB of disk space). My system specs are:
Backend
Old AMD Athlon 1.666GHz 256MB Ram Slackware Linux 10.2 300GB SATA Hard Drive (to be upgraded to RAID soon) PVR-150MCE PCI Capture Card DirecTV Hughes Receiver connected via SVideo IR Blaster bundled with the PVR-150 to change channels MythTV SVN r9070 (Backend & MythWeb)
Living Room Frontend
…
[Continue reading]
By erich, on April 2nd, 2006% After trying to troubleshoot some MythTV and system issues this afternoon, I managed to loose my storage raid array. It was really quite stupid. I forgot that you don’t need to make a partition for an md0 device…
For those of you needing further clarification, once a raid array (md device) is created, there is no need to make a partition on it. It _is_ the partition!
When mkfs.jfs /dev/md0 was used, it corrected the ‘partition’ that I created.
So, I destroyed the data on /dev/md0 by creating a partition and then formatting it. No big deal, it’s just TV. Oh wait. The new series of the Simpson’s and Doctor …
[Continue reading]
By erich, on March 15th, 2006% This is day two of getting MythTV setup on a backend server. ?I’ve got the front end working on my Xbox.
I’m really getting frustrated with MythTV and Debian. ?From what I have read, Debian is the preferred choice to install MythTV onto. ?Well, Debian has got to be the worst Linux distro I have used!!! ?DO NOT USE DEBIAN… It’s horribly outdated, very clunky, and no one seems to keep the dependencies up to date. ?If you didn’t install something while it was available, you’re screwed! ?Not even Google cache will help!
I can’t believe that the Nokia 770 is based off of this FPOS distro!
Here’s a little …
[Continue reading]
By erich, on March 5th, 2006% When Brian was at my house a few weeks ago, he used the maemo ‘flasher’ to enable the R&D mode on my nokia 770. Basically, it allows you to do extra functions that you wouldn’t normally do; such as gaining root.
I noticed that the maemo website had a newer firmware ROM image than what was currently installed on my 770.
Because I noticed some problems with the current ROM image, I decided to update the firmware.
My concern was that if I updated the firmware, I would loose the R&D mode. As it turns out, the R&D mode flag is completely indepentent of the firmware update.
Now my 770 …
[Continue reading]
By erich, on January 31st, 2006% there seems to be several blogs and sites that describe how to create swap but few actually give step by step directions.
the nokia 770 is a great device, but occasionally when browsing graphic or media rich websites, the error ‘not enough memory’ is displayed.
to solve this, a swap file is needed.
as root: # touch /media/mmc1/swap # dd if=/dev/zero of=/media/mmc1/swap bs=1024 count=16384 # mkswap /media/mc1/swap 16384 # swapon /media/mmc1
count=32768 can be substituted for a 32 MB swap file…
it doesn’t make processing faster, but it should allow you have more applications open…
By brian, on January 17th, 2006% With Cingular, one could get away with using their “Unlimited MEdianet” data plan ($19.99 per month) to have full internet access (which they try to charge you $44.99 per month for) by simply bypassing their proxy server. Unfortunately, T-Mobile is smarter than that, and forces you to buy their $19.99 internet plan if you wan’t unrestricted access to the internet without using a proxy server. I don’t consider this a down side since its essentially the same price I was paying with Cingular, except I’m no longer breaching my terms of service agreement by tethering my phone to my laptop. Since I didn’t buy a T-Mobile phone (but kept my …
[Continue reading]
By brian, on January 4th, 2006% Bank of America just mandated this new “security feature” called SiteKey. Apparently, it is to help reduce phishing attacks to the bank of America online banking website. Well, since I just wasted 25 minutes of my time setting this thing up, I’m going to waste your time forcing you to read about it rather pointless “feature”.
Essentially, the theory behind SiteKey is that you enter your “Online ID” on the bofa.com front page and hit the submit button. If the server detects your browser, it will present you with a customizable picture and text that only Bank of America would know … that way you can quickly ensure you’re on …
[Continue reading]
By brian, on December 31st, 2005% For those of you who care, I’ve upgraded 11h.net/blog to WordPress 2.0. The upgrade was a snap and took only a few minutes of my time on New Year’s Eve.
If you can’t view the blog anymore, simply reply to this post and I’ll fix it 🙂
By brian, on December 8th, 2005% Remember to spread the word that the time Dec 31 23:59:59 2005 will advance to Dec 31 23:59:60 2005 before the year rollover to Jan 01 00:00:00 2006 due to a leap-second. Luckily, the Linux ctime() function call allows for leap-seconds. Since I’m sure only Eric & I read this blog, I suspect it’ll only be him and I counting down the new year properly: 10… 9… 8… 7… 6… 5… 4… 3… 2… 1… 0… Happy New year! w00t!
|
|
Recent Comments